Mercedes MBUX Module, OBD2 Plug-and-Play System, Airmatic Suspension, Matte Black

Ensure the device will work by emailing the VIN number. The MWM lowering module enables you to adjust the AIRMATIC suspension height. The unit provides full control over the front and rear suspension, allowing incremental changes in 1mm steps.

The lowering settings will be loaded via the OBD2 diagnostic port located in the footwell of the car. After plugging the module into the OBD2 port, the menu will appear on the Mercedes Command screen. Following the adjustment and saving of the settings, the suspension will adapt to the new height within 30 seconds.

The factory setting is always stored on the module, allowing the user to revert to the original height. Once the settings are loaded, simply unplug the module and keep it for future use. The key benefits are:

No need to visit the dealer, no wiring, no soldering, and no car disassembly required. No requirement to connect the device to a laptop, smartphone, or PC. All settings are performed using the factory car equipment: TouchPad and car display. Factory level can be restored in 30 seconds. The module stores the current user settings, so you don't need to keep it connected.

The module is compatible with the following Mercedes models equipped with Airmatic suspension: Mercedes GLC facelift x253, c253, Mercedes GLE w167, Mercedes GLS x167, Mercedes E facelift w213, and Mercedes CLS facelift c257.

We offer two versions of the module, each with three preset modes: 1. Factory (factory level when the module is first plugged in), Low1 (20mm), ExtraLow2 (40mm) 2. Factory, Low1 (30mm), ExtraLow2 (50mm)

Important: After the adjustment is complete, start the engine, close all doors, and wait for the Airmatic system to take effect. The price includes adjustment for one car.

Before placing an order, please email the VIN number for compatibility check.

The module is easy to use. Simply insert it into the OBD2 diagnostic port and select the desired height. No installation or configuration is required.

The suspension will function as usual, but with the additional lowering provided by the module. For example, if the suspension lowers by -15mm when switching from Comfort to Sport+ mode, and you lower the car by -30mm using the module, the total lowering will be -45mm from the factory Comfort mode.

There is no need to keep the module plugged in at all times. You only need to connect it when you want to change the height or return to the factory setting. Afterwards, disconnect the module.

Fit type: Vehicle Specific Part number: mbux-airmatic-module

product information: